Entry

Network: Card: Name: Find: Microsoft: Windows: How to find the network card name?

Jan 22nd, 2006 11:01
Knud van Eeden,

----------------------------------------------------------------------
--- Knud van Eeden --- 22 January 2021 - 06:02 pm --------------------
Network: Card: Name: Find: Microsoft: Windows: How to find the network 
card name?
---
Steps: Overview:
 1. -Open an MSDOS box and type the following command:
      netsh interface show interface
 2. -That will show e.g.
--- cut here: begin --------------------------------------------------
Admin State    State          Type             Interface Name
-----------------------------------------------------------------------
--
Enabled                       Dedicated        Local Area Connection
Enabled                       Internal         Internal
Enabled                       Loopback         Loopback
--- cut here: end ----------------------------------------------------
 3. -In case you use that network name in e.g. a batch file,
     put the name between double quotes
      e.g. "Local Area Connection"
---
---
Internet: see also:
---
Network:Microsoft:Windows:How to create batch file to set IP 
address,mask,gateway,DNS,proxy?Overview
http://www.faqts.com/knowledge_base/view.phtml/aid/39154/fid/868
---
Operating system: Microsoft: Windows: XP: Link: Overview: Can you give 
an overview of links?
http://www.faqts.com/knowledge_base/view.phtml/aid/34878/fid/868
----------------------------------------------------------------------