Entry
TSE: File: Backup: How does the backup process work?
Apr 8th, 2006 07:58
Knud van Eeden,
----------------------------------------------------------------------
--- Knud van Eeden --- 08 April 2021 - 03:04 pm ----------------------
TSE: File: Backup: How does the backup process work?
===
Steps: Overview:
1. -If you set the backup settings as follows
1. -If you set 'backup path' in the configuration
1. -Whenever you save your file, also a file with the same
filename is saved in that backup path
1. -E.g. you are working with the file
c:\myFilename.txt
2. -Your backup path is set to
c:\temp
1. -When you save this file, it is
1. -Saved as usual in
c:\myFilename.txt
2. -But also in the backup path
in a file with the same name
c:\temp\myFilename.txt
2. -If you set 'backup extension' in the configuration,
1. -Whenever you save your file, also a file with that
extension is saved in the same path as that file
1. -E.g. you are working with the file
c:\myFilename.txt
2. -Your backup filename extension is set to
bak
1. -When you save this file, it is
1. -Saved as usual in
c:\myFilename.txt
2. -But also a backup file
in the same path, with
that backup extension
in a file with the same name
c:\myFilename.bak
3. -Note:
1. -If you set the 'backup path', then
the 'backup extension' is ignored.
The backup will then thus be handled
according to setting of the 'backup path'
process.
===
Tested successfully on
Microsoft Windows XP Professional (service pack 2),
running
TSE v4.x
===
Internet: see also:
---
TSE: File: Backup: Link: Can you give an overview of links?
http://www.faqts.com/knowledge_base/view.phtml/aid/40416/fid/896
----------------------------------------------------------------------